RateIt - OTC

OTC

product_img5

OTC (28228) Ram Cap Accessory For OTC 4120 Power Twin Single-Acting Hydraulic Ram

Ram cap accessory 1 inch-8 thread 1-1/2 inch diameter For the OTC 4120 Power Twin Single-Acting Hydraulic Ram Adapters and accessories attach to a ram’s forcing screw or are used on the press bed to support work...

product_img5

OTC 1735B 2000 lb. Capacity, Heavy-Duty, Motor-Rotor Twin Post Repair Stand

The OTC 1735B handles a wide variety of engines, transmissions, torque converters, and rear axles from trucks, tractors, and construction machinery The 50:1 ratio reduction gearbox and twin-post design allows full, 360 degree rotation of mounted unit with just a turn of the crank To ensure engine st...

product_img5

OTC (4603) Frost Plug Remover/Installer Set

Designed to remove and install frost plugs used in liquid-cooled gas and diesel engines found in automobiles, trucks, SUVs, agricultural equipment, and construction equipment Simply use a hammer with the driver and appropriate disc to install frost plugs ranging from 1 inch to 2-3/8 inches in diamet...

product_img5

OTC 1101 15-3/4" Long Replacement Puller Legs for OTC No. 927 10-Ton Push-Puller - Pair

Pair of legs for use with OTC's No. 927 10-Ton Capacity Push-Puller High strength legs are made to withstand heavy use under shop conditions 15-3/4 inches long Reach equals length plus 1-1/2 inches if end caps are used External-internal threaded adapters (not included) that attach to the ends of the...

product_img5

OTC 6731 Ball Joint Adapter Update Kit for Ford

Ball Joint Adapter Update Kit for select Ford vehicles Must be used in conjunction with an OTC Ball Joint Press and other OTC ball joint tools to perform a complete ball joint replacement - this set is for installation only Set includes: (38355A) Installing Cup, (531739) Receiving Cup, and (204508A)...

product_img5

OTC 7080 Ball Joint Spanner Wrench

Manufacturer: OTC Auto & Truck Maintenance Country of manufacture: United States Part number: 7080...

product_img5

OTC 6068 Diesel Fan Clutch Wrench for Ford

Designed for use with OTC 7205E1 holding tool to remove fan clutch assembly Has a special bend in the handle to provide clearance for accessories found on some vehicles Application 1998-2003 Ford vans and pickups with 7.3L direct-injected turbocharged (DIT) diesel engine Wrench size 1-7/8 inch (47 m...

product_img5

OTC (7894) Jeep/Dodge Ball Joint Service Adapter

Use with the OTC 7249 ball joint set to remove or install aftermarket and original equipment upper and lower ball joints Removes and installs the offset ball joints used to change caster/camber Works with 1984-newer "downsized" Jeep Wagoneer, and 2WD and 4WD Cherokee and Comanche; 1987-newer Jeep Wr...

product_img5

OTC Clamshell Strut Spring Compressor - 6494

Manufacturer: OTC Auto & Truck Maintenance Country of manufacture: United States Part number: 6494...

product_img5

OTC 4579 9-Way Slide Hammer Puller Set , Black

Pulls flange-type rear axles and most front-wheel drive hubs Internal and external jaws provide a variety of combinations to pull bearings gears and seals Two- and three-way cross blocks and cone provide the perfect jaw configuration for most jobs Includes a grip wrench adapter and a dent puller att...

product_img5

OTC 6733 Asian Vehicle Ball Joint Adapter Update Kit

Asian Vehicle Ball Joint Adapter Update Kit Two-piece tool kit is designed for use with OTC's No. 6530 Ball Joint Kit Kit permits removal and installation of lower ball joints on select Honda and Toyota vehicles Honda CR-V (1997–2006), Honda Odyssey (1995–2004), Toyota 4Runner (1996–2006), Toy...

product_img5

OTC (6522-14) Leak Tamer Delrin Nozzle

Replacement Delrin nozzle For the OTC 6522 Leak Tamer Item Package Dimension: 6.25L x 4.05W x 0.47H inches Item Package Weight - 0.02 Pounds Item Package Quantity - 1 Product Type - VALVE...

product_img5

OTC 1909 Wheel Bearing Locknut Socket - 8 Point, 3-1/4" Opening Size

Wheel bearing locknuts are easy to remove or install with these specially designed sockets OTC wheel bearing locknut sockets are formed from high-strength steel that is resistant to rounding out under high torque loads Designed for use with 3/4 inch, square-drive MANUAL tools only NOT intended for u...

product_img5

OTC (522) Large Gear and Pulley Puller

With OTC's 522 Large Gear and Pulley Puller you can easily remove a wide range of gears, pulleys or other parts that have tapped holes Spread from 2 inches to 7-3/4 inches; block is 8-1/4 inches wide Forcing screw is 3/4 inch-16 x 11-5/8 inches long Accommodates any cap screw up to 1/2 inch diameter...

product_img5

OTC 6667 Harmonic Damper Puller

Hand Tools Manufacturer: Otc Country of Manufacturer: Taiwan Package Dimensions: 8.9" L x 6.2" W x 2.2" H...

product_img5

OTC 4121A 30 Ton Hollow Center Hydrualic Ram with Adapter

Center-hole rams are ideal for jobs that require a great deal of force and a relatively short stroke Compared to the force it develops, the ram is lightweight, compact, and easy to handle, permitting its use in confined quarters Center-hole feature allows extending jacking screws, cables, puller scr...

product_img5

OTC 1926 3-3/4" 6-point Wheel Bearing Locknut Socket

Wheel bearing locknuts are easy to remove or install with these specially designed sockets OTC wheel bearing locknut sockets are formed from high-strength steel that is resistant to rounding out under high torque loads Designed for use with 3/4 inch, square-drive MANUAL tools only NOT intended for u...

product_img5

OTC 4581 Slide Hammer and Blind Hole Bearing Puller Set

The OTC blind hole bearing puller set is for those jobs requiring an internal pull set includes four collets sizes 7/16 inch to 1/2 inch, 9/16 inch to 11/16 inch, 5/8 inch to 1 inch, and 1 inch to 1-1/4 inch which fit a wide range of applications Select the appropriate sized collet by comparing it w...

product_img5

OTC 1953M Truck Wheel Bearing Locknut Socket - 6 Point, 70 mm Opening Size

Wheel bearing locknuts are easy to remove or install with these specially designed sockets OTC wheel bearing locknut sockets are formed from high-strength steel that is resistant to rounding out under high torque loads Designed for use with 3/4 inch, square-drive MANUAL tools only 6 point, 70 mm (fl...

product_img5

OTC 1911 Wheel Bearing Locknut Socket - 8 Point, 3-1/2" Opening Size

Wheel bearing locknuts are easy to remove or install with these specially designed sockets OTC wheel bearing locknut sockets are formed from high-strength steel that is resistant to rounding out under high torque loads Designed for use with 3/4 inch, square-drive MANUAL tools only 8 point, 3-1/2 inc...

10
11