RateIt - OTC

OTC

product_img5

OTC 7937 Transmission Oil Cooler Line Disconnect Tool for GM, Silver

OTC's GM Transmission Oil Cooler Line Disconnect Tool is specially designed for one handed operation in tight spaces Simply snap the tool over a 1/2 inch diameter line - with slots facing the fitting - then squeeze and insert the tool, rotating it until it engages the fitting - a 1/4 turn releases t...

product_img5

OTC 1020 1-Ton 'Grip-O-Matic' Puller - 2 Jaw (Mechanical)

OTC's 1-ton capacity, 2-jaw, gear and bearing puller enables you to remove and install parts for fast, effective repairs Forged from quality steel, heat treated, and subjected to rigorous tests which exceed the rated capacity Maximum reach - 2-1/8 inches; maximum spread - 3-1/4 inches Jaw thickness ...

product_img5

OTC 5039 Charged Air Cooler Tester for Class 7 and 8 Trucks

OTC's Charged Air Cooler Tester is the easy way to find air leaks in charged air cooler systems For use on class 7 and 8 truck engines Large, easy to read 2-1/2 inch pressure gauge reads 0-60 PSI Kit includes regulator, relief valve, and two safety cables Quick disconnect air fittings attach to 3 in...

product_img5

OTC 6743 3-Piece Pump Seal Installer Set for 2014 and Newer GM 6T30, 6T40, 6T45, and 6T50 6-Speed Automatic Transmission

OTC's 6743 Pump Seal Installer Set protects, installs and sizes the torque converter fluid seal ring into the stator support during unit overhaul Designed for use on 2014 and later GM 6T30, 6T40, 6T45 and 6T50 6-speed automatic transmissions found in Chevrolet and Buick FWD and AWD vehicles 3-piece ...

product_img5

OTC (525) Flange-Type Puller Combination Kit

OTC's 525 Flange-Type Puller Combination Kit features two specialty pullers in one box Flange-type puller for removal of harmonic balancers, timing gears, and other parts with two or three tapped holes You also get a steering wheel, pulley, and flywheel puller Includes four sets of cap screws to fit...

product_img5

OTC 6509 Fuel Line Disconnect Tool

OTC's scissors type fuel line disconnect tool makes short work of hard to release fuel line connectors Super compact, low profile 3-1/2 inch long tool fits in the tightest spaces to release fittings on fuel rails, fuel filters, sending units, and more Double ended tool accommodates 5/16 inch fuel li...

product_img5

OTC 1166 Internal Pulling Attachment - Bearing Puller for Blind Holes w/Adapter

OTC's internal pulling attachment removes bearing cups, oil seals, bushings, and other parts from blind holes quickly and easily Jaw spread is 3 inches to 9 inches; jaw reach is 5-7/8 inches Tapped hole in adapter has a 1-1/4"-7 thread Tapped hole in cross block has 1"-14 threads Use with No. 1071 H...

product_img5

OTC 1585A 1,250 lb. Power Train Lift with Tilting Plate - Ideal for Engine/Transaxle Service

OTC’s 1585A 1,250 lb. Powertrain Lift is ideal for engine and transaxle service but can also be used for transmissions, transfer cases and other heavy, under vehicle components 1585A features air/hydraulic operation (requires shop air for functionality) and a compact design with 4-inch swivel cast...

product_img5

OTC Tools & Equipment 3491-13 20 ft. Digital Pressure Gauge Cable for 3490/3491 / 3492

OTC Tools & Equipment 3491-13 20 ft. Digital Pressure Gauge Cable for 3490/3491 / 3492...

product_img5

OTC 5040 Injector Remover/Installer for Cummins

OTC's best tool for removing or installing fuel injectors on Cummins L10 and N14 Celect electronically controlled engines Large slide hammer and pin-type pulling adapter easily and safely handles injector jobs Two installing adapters help prevent damage to the injector's electronic solenoid High-gra...

product_img5

OTC 1779B 12-Ton Capacity High Profile Jack Stand - 33-3/4 to 44-1/4 Inch Range, Blue

OTC's Heavy-Duty, 12-Ton (24,000 lb.) capacity, high profile jack stand has the strength and stability needed for big jobs Rugged formed and welded steel construction incorporates a large spun steel foot that won't dig or sink into asphalt, sand, or other soft surfaces Round tube center post feature...

product_img5

OTC 4607 1/2 Inch Drive Impact Driver with 8 Piece Screwdriver Bit Set

OTC's 1/2 inch Impact Driver loosens hard-to-turn screws, bolts, or nuts that normal handtools can't Protective handle design prevents the possibility of hitting your hand with the hammer when striking the impact driver 1/2 inch drive bit holder features a 5/16 inch female hex for Phillips and flat ...

product_img5

OTC 4599 One-Man Brake Bleeder Hose

OTC One Man Brake Bleeder Hose Designed to allow one person to remove air from brake systems one wheel at a time Hose simply slides onto bleeder screw then tangs and sliding lock washer hold hose securely in place to prevent leaking Check valve on the other end of the hose prevents air from entering...

product_img5

OTC (885) Adjustable Hook Spanner Wrench

OTC's Adjustable Hook Spanner Wrench is the right tool for use wherever turret adjusting nuts or packing gland nuts are used 1-1/2 inch to 4 inch capacity 11/16 inch diameter handle is 24 inches long Heavy-duty metal construction Plated finish resists rust and corrosion...

product_img5

OTC 6725 Belt Tensioner Compressor for Select 2.4L GM eAssist Engines: 2012-16 Buick Lacrosse, 2012-17 Buick Regal, and 2011-14 Chevrolet Malibu

OTC's 6725 Belt Tensioner Compressor makes replacing engine drive belts and starter generators easier Tool compresses the belt tensioner spring during engine drive belt replacement and starter generator servicing Applications include 2.4L GM eAssist engines found in 2012-16 Buick LaCrosse, 2012-17 B...

product_img5

OTC 7367 Torque Multiplier - 1000 lb-ft

OTC's 1,000 lb-ft Torque Multiplier Wrench is used to tighten or remove nuts and bolts over and above the rated force a standard wrench can produce Perfect for differentials, suspension fasteners, lug nuts, frozen nut or bolt applications, and more - ideal for situations regular wrenches just can't ...

product_img5

OTC 4568 2-1/2" to 5-1/4" 3-Prong Self-Adjusting Oil Filter Remover

OTC's 3-prong self-adjusting oil filter wrench features 3 arms that adjust to fit a wide range of filter sizes, making this a very flexible tool for the workplace or home shop Knurled legs provide extra gripping power; rotation of the tool adjusts the the legs tightly against the filter Fits filters...

product_img5

OTC 6979 Heavy Duty Brake Drum and Rotor Puller

OTC's 6979 is the ideal solution for removing frozen, rusted or seized drums and rotors found on 1-ton pickups, school buses, and larger vehicles Puller has a usable spread of 17.5 inches, a maximum reach of 12.25 inches, and comes with two forcing screws for standard and tall brake drums; Both scre...

product_img5

OTC 6778 Injector Puller for 2001-2004 GM Duramax Engines, 0.5

OTC Injector Puller for GM Duramax engines - similar to Kent Moore J-44639 For use on 2001-2004 model year GM Duramax 6.6L engines Safely pulls the injectors from the cylinder heads without pulling the injector cups Simply insert the tool into the injector retainer bracket bolt hole, attach a socket...

product_img5

OTC 5192 Heavy-Duty Bearing Cup Installer for Bolt-Retained U-Joints

OTC's Heavy-Duty Bearing Cup Installer quickly and easily installs bearing cups on bolt-retained universal joints For use with Spicer series 1610 to 1880 and nearly all other heavy-duty truck and machine type u-joints with bolt-retained bearing cups Design automatically aligns bearing cups during in...

6
7