RateIt - OTC

OTC

product_img5

OTC 4557 Heavy-Duty Oil Filter Wrench - 5" to 5-3/4" Capacity, Black

OTC Heavy-Duty Oil Filter Wrench. Fits spin on filters ranging from 5 to 5-3/4 Inch (131 mm to 144 mm) in diameter. Features a 1-1/2 inch wide steel band that can stand up to the high torque needed to remove filters from trucks, tractors, and other heavy equipment. Use with a 1/2 inch drive ratchet ...

product_img5

OTC 5021 Universal Diesel Engine Compression Gauge

OTC's Universal Diesel Engine Compression Gauge will work on any diesel engine Tests compression up to 1000 psi and 7000 kPa Features include: check valve, push button compression release, and quick disconnect fitting on hose end Straight and 45 degree hose connectors with quick-connect fittings are...

product_img5

OTC Tools 5889 Rocker Arm Shaft Socket for Detroit Diesel Series 60 Engines

OTC's Rocker Arm Shaft Socket is a deep-well 12mm socket used to torque rocker arm nuts to OE specification Specially designed socket features a stepped outside diameter for proper clearance and access to the fastener Applications include Detroit Diesel Series 60 engines Specifications: 12mm, 12pt s...

product_img5

OTC 6087 Injection Pump Wrench Set for GM

OTC's Injection Pump Wrench Set is used to loosen or tighten injection pump retaining bolts whenever pump timing adjustment or pump service is required Two specially formed wrenches are needed due to the location of the throttle, cruise control, T.V. cable bracket, cooling system crossover pipe and ...

product_img5

OTC Tools 4853 Piston Ring Compressor

OTC's Piston Ring Compressor makes installing pistons into an engine block trouble free Universal piston ring compressor clamps around piston to compress piston rings during piston installation Adjustable handle provides an effective size range for rings from 2.125 inch to 5.0 inch diameter Size ran...

product_img5

OTC 464 2-Ton 'GripLock' External and Internal Puller

OTC's 2-Ton 'GripLock' Puller features a 4 inch maximum reach and a 3-4 inch spread Pressure bearing yoke cap holds jaws in place for ease of set up - in any orientation Configurable as a 2 or 3 jaw puller to suit your needs Both external and internal pulling action Live Center' action forcing screw...

product_img5

OTC 6764 Injector Pressure Regulator Controller for Ford 6.0L Diesel Engine

OTC's Injector Pressure Regulator Controller for Ford 6.0L Diesel Engines plugs directly into the factory Injector Pressure Regulator using an OE compatible connector Allows the user to close the injector pressure regulator in order to determine if proper injector control pressure is achieved and su...

product_img5

OTC 5736-30 Curved End Tire Spoon for cars, light trucks, and SUVs - 30 Inches Long

OTC's curved end tire spoon, with extra length, is a great choice for mounting and demounting car, light truck, and suv tires Unique 'Convex Slip Head' curved design dramatically reduces pinching and allows the spoon to slide easily into and out of the tire bead Curved spoon head also features a 'sp...

product_img5

OTC SEAL KIT REPAIR KIT...

product_img5

OTC 4791 Spanner Wrench - 3/4" to 2" Capacity

OTC's Spanner Wrench features a slim, strong hook to access slotted retaining rings in hard to reach areas Hardened chrome vanadium steel construction 5 inch long handle 3/4 inch to 2 inch capacity...

product_img5

OTC 7345 Extra Long Hex Key Wrench - 1/16"

OTC's long-arm hex key wrenches provide added leverage and accessibility compared to standard length hex key wrenches High quality materials and construction ensure these hex key wrenches meet ANSI specs Durable black oxide finish resists rust Size: 1/16 inch; fits no. 6 recessed hex (Allen) set scr...

product_img5

OTC 1929 6-Lug Tubular Spanner Wrench for Wheel Bearing Locknuts on Chevrolet/GMC Heavy Duty Axles

OTC's Six-Lug Tubular Spanner-Type Wrench removes and installs rear wheel bearing locknuts on heavy-duty axles Heavy-duty tool is designed for use with a 3/4 inch square-drive ratchet or breaker bar For use when servicing Chevrolet and GMC 5,200 to 7,200 lb. axles Socket has a 2-5/8 inch O.D....

product_img5

OTC 1044 17-1/2 Ton 'Grip-O-Matic' Puller - Long 2 Jaw (Mechanical)

OTC's 17-1/2-ton capacity, long 2-jaw, gear and bearing puller enables you to remove and install parts for fast, effective repairs Forged from quality steel, heat treated, and subjected to rigorous tests which exceed the rated capacity Maximum reach - 18-3/4 inches; maximum spread - 16 inches Jaw th...

product_img5

OTC 1540 4-Ton Capacity Fork Lift Jack

OTC's 4-Ton (8000 lb.) Capacity Fork Lift Jack features a low starting height of 2-5/8 inches and a maximum lifting height of 16-1/4 inches Two-position lift pad permits handling of all lift truck configurations with flat or edged surfaces Jack features include high-quality seals and high-strength s...

product_img5

OTC 6489 Ford Master Cam Tool Service Set for Select 1992 to 2012 Vehicles

OTC's Master Cam Tool Set for Ford vehicles contains 22 tools based on OE designs that allow technicians to correctly set cam timing for optimum engine performance and economy Tools are designed for use on more than 50 vehicles produced during model years 1992 to 2012 Works for a wide variety of For...

product_img5

OTC 1038 7-Ton 'Grip-O-Matic' Puller - Long 2/3 Jaw (Mechanical)

OTC's 7-ton capacity, long 2/3-jaw, gear and bearing puller is easily configurable as either a 2 or 3 jaw puller enabling you to remove and install a wider variety of parts for fast, effective repairs Forged from quality steel, heat treated, and subjected to rigorous tests which exceed the rated cap...

product_img5

OTC 7028 Heavy-Duty Clutch Adjusting Wrench for Spicer Clutches

OTC Heavy-Duty Clutch Adjusting Wrench for Spicer Clutches This clutch adjusting wrench will solve the difficult, time consuming job of internally adjusting heavy-duty Spicer clutches Using this wrench, clutch adjustment is much quicker and easier than homemade alternatives Use of the correct tool p...

product_img5

OTC Tools 7402 Universal Outside Thread Chaser

OTC's Universal Outside Thread Chaser will quickly restore threads on all kinds of objects to near original condition without the use of expensive thread-cutting equipment The wide variety of cutting heads work on items as varied as faucet heads, threaded containers, fork tubes, steering stems, and ...

product_img5

OTC 6469 Camshaft Sensor Synchronizer Tool for Select 1997 - 2008 Ford and Mercury Vehicles

OTC Ford/Mercury Camshaft Sensor Synchronizer Tool This high quality metal tool is a 'must have' for ensuring correct installation of the cam sensor housing Correctly aligns shaft and housing for insertion into engine once engine has been rotated to top dead center on the no. 1 cylinder's compressio...

product_img5

OTC 6673 Belt Tension Gauge, Universal

OTC's Belt Tension Gauge is designed to allow you to properly check belt tension on drive belts Correct tension ensures maximum belt and bearing life Easy to read dual scale reads 30-180 lbs. (2.5-15 ft. lbs.) and 130-800 Newtons High-grade materials ensure quality performance over the lifetime of t...

8
9